MOTION CONTROLS

Pneumatic cylinders, tie rod cylinders, couplers, switches

MOTION CONTROLS

SCI Sharp Controls is a distributor for Motion Controls products including pneumatic cylinders, position sensors, tie rod cylinders, pneumatic and hydraulic cylinders.  If you don't see the Motion Controls cylinder you need, please give us a call.

Motion Controls: Tie Rod Cylinders

Motion Controls' tie rod cylinders "D" Series does not offer different rod sizes in the same bore, but do offer different rod ends.  These tie rod cylinders feature:

  • Non-Metallic Bearings - A specially compounded reinforced Teflon material is used for the piston and rod bearings, assuring low friction characteristics. Bearing assembly is easily removed for quick replacement.
  • Non-Lube Operation - Long life D cylinders are specifically designed for non-lube operation
  • Cushions - High energy absorption poppet style adjustable cushions are available as a standard option. Cushion adjusting screw is normally located in position number 4.
  • Piston Rod - Hard chrome plated steel, ground and polished. Two wrench flats standard on all bore sizes. Full male national coarse threads are standard. All other threads available as options.
  • Tubing - Hard coated I.D. aluminum for corrosion resistance and low friction.
  • Seals - All dynamic seals are self-adjusting Block Vee Buna-N U-cups.
  • End Caps - Machined high strength aluminum alloy.
  • Pressure Rating - 250 psi. air or "non-shock" hydraulic.
  • Temperature - Operating temperature range from a minimum of 10� F (-12�C) to a maximum of 200� F (93� C).
  • Cushions - Popper cushions can be specified for either or both ends of the Series "D" cylinder. Standard cushion length is one inch, with optional lengths of two, four, and six inches. Each standard cushion increases the cylinder length by one inch.  Increases for longer cushions are available.

 

Motion Controls: NFPA "K" Series

  • Non-Metallic Bearings - A specially compounded reinforced Teflon material is used for the piston and rod bearings, assuring low friction characteristics. The bearing assembly is easily removed for quick replacement.
  • Non-Lube Operation -Long life K cylinders are specifically designed for non lube operation
  • Cushions - High energy absorption poppet type adjustable cushions are available as a standard option. The cushion adjusting screw is normally located in position No. 2
  • Piston Rod - Hard Chrome plated steel ground and polished. Two wrench flats standard on all bore sizes. Small male national fine threads are standard. All other threads available as options.
  • Tubing - Hard coated I.D. aluminum for corrosion resistance and low friction.
  • Seals - All dynamic seals are self adjusting Block Vee Buna-N U-cups
  • End Caps - Machined high strength aluminum alloy.
  • Pressure Rating - 250 PSI air or "non stick" hydraulic
  • Temperature - Operating temperature range from a minimum of 10� F (-12� C) to a maximum of 200� F (93� deg C).

Motion Controls: Alignment Coupler

  • Eliminate expensive precision machining for mounting fixed or rigid guide in cylinder for slide applications
  • Increase cylinder efficiency by eliminating friction caused by misalignment.
  • Compensate for 2� angular error and 1/16 lateral misalignment on push and pull stroke.
  • Greater reliability - reduces cylinder and component wear.
  • Simplify alignment problems in the field.
  • All components are heat treated for improved corrosion and wear resistance, fatigue properties and black appearance.

Motion Controls: Switches

Motion Controls features Canfield switches.  Reed switches require a magnetic field, they can be ordered normally open or closed.

REQUEST A QUOTE

Let us know about your project, and we'll contact you with a quote.

ALLOW US TO HELP YOU, TO HELP YOUR BUSINESS!

 

CALL US AT 704-394-1395 OR REACH US BY EMAIL TO

 

INFO@SHARPCONTROLS.COM

SCI Sharp Controls, Inc.
11331 Downs Road
Pineville, NC 28134

(704) 394-1395 fax (704) 392-5521

info@sharpcontrols.com