Motion Controls Tie Rod Cylinders (NFPA)
Motion Controls “K” Series NFPA tie rod cylinders – non metallic bearings – a specially compounded reinforced Teflon material is used for the piston and rod bearings, assuring low friction characteristics. The bearing assembly is easily removed for quick replacement. Motion Controls, LLC has 40 years of budget efficient designs. The long life K cylinders are specifically designed for non lube operation.
"K" SERIES TIE ROD CYLINDERS NFPA
Motion Controls’ tie rod cylinders “K” Series feature:
Non-Metallic Bearing
A specially compounded reinforced Teflon material is used for the piston and rod bearings, assuring low friction characteristics. Bearing assembly is easily removed for quick replacement.
Non-Lube Operation
Long life K cylinders are specifically designed for non-lube operation
Cushions
High energy absorption poppet type adjustable cushions are available as a standard option. Cushion adjusting screw is normally located in position number 2.
Piston Rod
Hard chrome plated steel, ground and polished. Two wrench flats standard on all bore sizes. Small male national fine threads are standard. All other threads available as options.
Tubing
Hard coated I.D. aluminum for corrosion resistance and low friction.
Seals
All dynamic seals are self-adjusting Block Vee Buna-N U-cups.
End Caps
Machined high strength aluminum alloy.
Pressure Rating
250 psi. air or “non-shock” hydraulic.
Temperature
Operating temperature range from a minimum of 10° F (-12°C) to a maximum of 200° F (93° C).
We offer the above from the following Brands
