Replacement Charging Assemblies
SCI Sharp Controls offers all the major brandsof charging assemblies and accessories necessary. Bladder type accumulators must always be inflated to the specified preload pressure before initial startup. The inflation pressure must be lower than the calculated pressure, which is rolled into the housing. Use any of our major brands of inflation and testing devices to check inflation pressure at initial startup. SCI Sharp Controls offers Nitrogen charging assemblies as well as seals and accessories from major manufacturer’s including Bosch Rexroth, Olaer, and others.
Charging Assemblies
Nitrogen Charging Assemblies, 3,000 psi, 207 bar – gauge assembly, charging hose assembly, gas cock extension
Nitrogen Charging Assemblies, 5,000 psi, 345 bar – gauge assembly, charging hose assembly, complete with case
Nitrogen Charging Assembly, 10,000 psi, 690 bar – gauge assembly, charging hose assembly, complete with case
Remote Nitrogen Charging Assembly, 3,000 psi, 207 bar – remote charging block assembly, bladder
Remote Nitrogen Charging Assembly, 5,000 psi, 345 bar – remote charging block assembly
Remote Nitrogen Charging Assembly, 10,000 psi, 690 bar – remote charging block assembly
Piston Seals
Rod Seals and Buffer Seals
Rotary Seals
Static Seals
Valve Seals
Wear Rings and Guiding Tape
Wipers
Service Tools
Fluid Drain Kits
Assembly Sleeves
Mounting Brackets, Sets
Oil Port Adaptors
We offer the above from the following Brands
