BUTECH

Valves: ball, needle, check valves, double block and bleed valves

BUTECH

SCI Sharp Controls is a distributor for Butech valves, fittings, and valve actuators.  We carry Haskel Butech high pressure ball valves, 2-way and 3-way diverting valves, 4-way and 5-way valves, valve actuators, 2-way trunion valves, needle and metering valves, and high pressure check valves.  If you don't see the valve you need, please give us a call.

Butech: Ball Valves

Butech ball valves are available in 2-way, 3-way, 4-way, and 5-way designs with pressures to 20,000 PSI (1,380 bar) at 72�F (22�C)  and a wide range of connections including male and female NPT, low-pressure compression fittings, medium- and high-pressure tube ends, medium- and high-pressure female, JIC 37� flare, SAE O-ring boss, socket-weld, butt-weld, and metric connections. They are available with special seal materials or manufactured from any machinable material for extreme applications. They also can be fitted with pneumatic or electric actuators for remote control.

2-Way Floating Ball Valves

Butech 2-Way floating valves for on-off service.  Pressures to 20,000 psi (1379 bar). Virtually all NPT and Coned & Threaded connection sizes available.

2-Way Trunnion Ball Valves

2-Way trunnion valves for severe high-cycle applications.  Pressures to 20,000 psi (1379 bar).

3-Way Diverting Ball Valves

Butech's3-way ball valves for diverting service to 20,000 PSI (1,380 bar). 3-way diverting ball valves are designed to divert media from a single source to one of two separate lines.

3-Way Switching Ball Valves

 

3-way ball valves for service to 20,000 PSI (1,380 bar). 3-way ball valves for switching service are ball vales designed to direct media from bottom inlet port to one of two separate lines.

4-Way Valves

4-way ball valves utilize a double-ported ball for crossover of two flows.

5-Way Valves

5-way ball valves direct media flow from a single bottom inlet to one of four separate lines.

Subsea Ball Valves

BuTech subsea ball come available as: 2-way ball valves in 3/8�, 1/2� and 1� configurations; 3-way ball valves in 3/16�, 3/8� and 1/2� configurations, and 4-way ball valves in a 3/8� configuration.

H-Series Ball Valves

BuTech H-Series ball valves are available in female NPT connections.

Butech: Needle Valves

Butech Needle Valves - Low, Medium and High Pressure with pressure ratings to 150,000 psi (1030 bar), are designed for liquid and gas flow control in petroleum, chemical, power generating and general industrial applications. Available in a variety of body styles, the valves are designed for operation at temperatures ranging from -100� to +600�F (-73� to +315�C). Optional packings and/or extended stuffing boxes increase the range to -423� to +1200�F (-253� to +648�C).

Needle Valves - Low Pressure

Low pressure needle valves for Service to 15,000 psi (1,030 bar).

Needle Valves - Medium Pressure

Medium pressure needle valves coned and threaded for service to 20,000 psi (1,380 bar)

Needle Valves - High Pressure

High pressure needle valves coned and threaded for service from 30,000 psi (2,070 bar) to 150,000 psi (10,340 bar) .

Needle Valve Pipe

Pipe needle valves offering pressures to 15,000 PSI (1,030 bar) at 72�F (22�C); 1/8" to 1" pipe sizes (NPT Threads); Non-rotating stem prevents galling and scoring; Four stem styles: Vee, Regulating, Metering, and Micro-Metering; 17-4PH stem for longer service life; Glass-filled PTFE packing for temperatures to 600�F (315�C).

Subsea Needle Valves

Needle valves for subsea use are externally sealed design for depths to 14,000� (4200 meters).

Needle Valve for Sour Gas Service

Needle Valves for SOG and Oil Field Service to 20,000 PSI (1,380 bar) and 30,000 PSI (2,070 bar).

Double Block and Bleed Needle

Double block and bleed needle valves and single block and bleed needle valves in various sizes and materials for higher flows, higher pressures or for sour gas applications.

 

Butech: Check Valves

BuTech check valves are designed for liquid and gas flow control in petroleum, chemical, power generating and general industrial applications. Available in a variety of body styles, the valves are designed for manual operation in temperatures ranging from 0� to 600�F (-18� to 315�C). Rugged construction provides assurance of fail-safe operation at pressures up to 15,000 PSI (1,030 bar). Note: BuTech Pressure Systems does not recommend compression sleeve connections below 0�F (-18�C) or above 650�F (343�C).

Check Valves - Low, Medium and High Pressure

Low pressure check valves for Service to 15,000 psi (1,030 bar).  Medium pressure check valves coned and threaded for service to 20,000 psi (1,380 bar).  High pressure check valves coned and threaded for service from 30,000 psi (2,070 bar) to 150,000 psi (10,340 bar) .

Check Valve Pipe

Pipe needle valves for service to 15,000 psi (1,030 bar).

Subsea Check Valve

Subsea check valves ensure flow in only one direction and are rated to pressures of 15,000 psig and above.

Butech: Subsea Valves

Manufactured to meet the requirements of NACE MR0175, API Spec 6A & 17D, ASME, ANSI and various others, BuTech subsea valves are externally sealed design for depths to 14,000 feet (4200 meters).  API 6A, 19th ed., ISO 10423:2003 PR2, Annex F/PSL3G qualified valves are available.

BuTech subsea valves are internally pressure tested to at least 50% over rated pressure and externally tested to 14,000� (4200 Meters) depth, having a typical service life guarantee of 25 years and offer the highest quality and most reliable performance for pressure control systems, throughout the entire life of the subsea structure. They ensure trouble-free operation with hydrogen sulfides, corrosion inhibitors, paraffin thinners, hydraulic fluids and other harsh chemicals.

BuTech subsea valves are manufactured from a variety of stainless steel materials, most common are 316 and Super Duplex.  However, Butech valves and fittings can be manufactured from virtually all machinable alloys.

Subsea Ball Valves

 

BuTech subsea ball come available as: 2-way ball valves in 3/8�, 1/2� and 1� configurations; 3-way ball valves in 3/16�, 3/8� and 1/2� configurations, and 4-way ball valves in a 3/8� configuration.

Subsea Needles Valves

Subsea needle valves are externally sealed designed for depths to 14,000� (4200 meters).

Subsea Check Valves

Subsea check valves ensure flow in only one direction and are rated to pressures of 15,000 psig and above.

Butech: Double Block and Bleed Valves

Double Block and Bleed Valves are space saving valves that eliminate the need for large and complicated multi-valve systems. BuTech double block and bleed valves can meet pressures to 20,000 PSI (1380 bar) at 72�F (22�C). Boasting a compact design, they come available with needle or ball valves, or a combination of both, manual lever or actuator activated. Benefits are minimized leakage points, reduced installation costs and maintenance requirements, as the valves allow sections of a piping system to be isolated for maintenance, with a drain valve between them, insuring that unwanted pressure doesn�t get into the section being serviced

BuTech double block and bleed valves can be configured to connect up to most sizes of tubing with all connection styles. Double block and bleed valves are primarily made from 316 stainless steel; however they can be machined from other machineable alloys with special seal materials to meet your specific needs. Standard materials include: Monel, Haskelloy, Titanium, Inconel, and Bronze.

Butech: Couplings and Adapters

BuTech offers a complete line of adapters and couplings, to connect different sizes and pressure rating of tubing and pipe. Standard construction is 316 cold � worked stainless steel. When looking for an adapter, the male connection is Connection 1, if both connections are male or both are female, use the highest pressure as connection 1. If you are unable to find an adapter, try reversing the selections between connection 1 and connection 2.

Butech: Nipples

BuTech nipples are sections of tubing or pipe cut to length with cones (if appropriate) and threads cut into them. The standard materials of construction for nipples are 304 and 316 stainless steel, however other materials are available, please contact your local distributor or the factory for more information. The standard lengths for nipples are 2.75�, 3�, 4�, 6�, 8�, 10� and 12�. Custom lengths between 3� and 20� are also available.

Butech: Pipe Equipment

Pipe Valves are designed for liquid and gas flow control in petroleum , chemical, power generating and general industrial applications.  Available in a variety of styles, the valves are designed for manual operation in temperatures ranging from -100� to +600�F (-73� to +315�C). Optional packings and/or extended stuffing boxes increase the range to -423� to +1200�F (-253� to +648�C). Their rugged construction provides assurance of fail-safe operation at pressures ranging to 15,000 PSI (1030 bar).

Butech: Accessories (Filters, Safety Heads, Rupture Discs)

One of the most complete lines of High Pressure Valves, Fittings & Tubing. BuTech valves system components are available in any alloy to handle pressures from vacuum to 150,000 psi (10,000 bar) and temperatures from -423� F (-253� C) to over 1200� F (649� C).

Any extreme application of erosive or corrosive solids, liquids or gases is ideal for BuTech products.  BuTech will custom engineer valves individually to meet specific application requirements including metric connections and special materials. BuTech also offers a line of valves designed specifically for use in power generating plants.

REQUEST A QUOTE

Let us know about your project, and we'll contact you with a quote.

ALLOW US TO HELP YOU, TO HELP YOUR BUSINESS!

 

CALL US AT 704-394-1395 OR REACH US BY EMAIL TO

 

INFO@SHARPCONTROLS.COM

SCI Sharp Controls, Inc.
11331 Downs Road
Pineville, NC 28134

(704) 394-1395 fax (704) 392-5521

info@sharpcontrols.com